Question on converting .cals from 1.03 to 1.19

[Goldfinger911]

I have read the conversion notes, searched the various forums, and everythign I see discusses converting from 1.11 to 1.19. What about 1.03 to 1.19.

Are the instructions the exact same? Meaning, the manual assigning of

A/C Clutch to A/C Output #1 and
A/C Fan Speed to A/C Output #2

Is that all that has to be done for a 1.03 map too?

I remember seeing a post that said something ot the effect that you can convert straight to 1.19 from .94 or higher. My friend and I have a map that is 1.03 that we want to run on a 1.19 EMS.

Thanks all.

-GF911

[ultimate4g63]

I tuned a new 1040 box that was shipped with 0.94.  If I recall, I had to convert it to 1.03 first.  Then just followed the conversion notes to convert that to 1.19.  This is just off the top of my head.  I don't remember if there were notes to convert to 1.03 first.

[maxboost77]

I tuned a new 1040 box that was shipped with 0.94.  If I recall, I had to convert it to 1.03 first.  Then just followed the conversion notes to convert that to 1.19.  This is just off the top of my head.  I don't remember if there were notes to convert to 1.03 first.

so for 1.03 to 1.19 conversion we just follow 1.11 to 1.19 conversion notes?