March 15, 2010, 06:33:03 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: AEM SERIES 2 EMS PLUG-N-PLAY FOR MKIV SUPRAS!
 
Pages: [1]
« previous next »
Print
Author Topic: *Part numbers for replacement parts for AEM gauges (harness, sensor, etc.)*  (Read 4273 times)
GT
500+ Post Club
****
Posts: 668
« on: March 25, 2008, 07:39:11 AM »
The following part numbers are special order items from your AEM dealer and you will not find it on our website.
We DO NOT sell any gauges by itself.

30-4100
6 pin UEGO sensor harness (96inches)             35-3400
4 pin power harness                                     35-3401
UEGO sensor                                               30-2001
Bezel kit (silver/blk bezel, blk/wht face)           35-8494

30-4350
5 pin power harness                                     35-3409

30-2300/2301
UEGO sensor                                               30-2001
« Last Edit: March 25, 2008, 07:49:05 AM by GT » Logged
Mello
500+ Post Club
****
Posts: 530
« Reply #1 on: March 25, 2008, 04:06:16 PM »
Would be nice to have this add into the *Instructions & Manuals* section.
Logged
camuman
EMS Poster Child
*
Posts: 5
« Reply #2 on: April 21, 2008, 06:54:05 PM »
does the bezel kit come with the clear plastic cover for the gauge?
Logged
2005 honda s2k
1992 civic hatch h22a 9:1 on boost
AusS2000
25+ Posts Club
*
Posts: 38


WWW
« Reply #3 on: June 30, 2008, 02:45:08 PM »
Is there a part no. for the Serial cable for the AEM Serial Datastream Gauge (30-4300)?

I am missing one.
Logged
GT
500+ Post Club
****
Posts: 668
« Reply #4 on: June 30, 2008, 02:51:12 PM »
Quote from: AusS2000 on June 30, 2008, 02:45:08 PM
Is there a part no. for the Serial cable for the AEM Serial Datastream Gauge (30-4300)?

I am missing one.
35-3408
Logged
afwfjustin
EMS Poster Child
*
Posts: 1
« Reply #5 on: July 02, 2008, 07:32:24 AM »
I am missing 35-3407 and 35-3408  Anyone know where I can find these cables?
Logged
GT
500+ Post Club
****
Posts: 668
« Reply #6 on: July 02, 2008, 07:46:27 AM »
Quote from: afwfjustin on July 02, 2008, 07:32:24 AM
I am missing 35-3407 and 35-3408  Anyone know where I can find these cables?
Contact an AEM dealer, they should be able to order those parts for you.
Logged
rx1turbo
EMS Poster Child
*
Posts: 1
« Reply #7 on: March 29, 2009, 01:07:08 PM »
I have a Boost/Vac gauge and the anti-glare shield has warped where the digital read out is located. Is there a replacement part number? Thanks
Logged
Smaay
25+ Posts Club
*
Posts: 77
« Reply #8 on: April 30, 2009, 06:50:37 AM »
ok here is a good question. i have the UEGO sensor now. if i wanted to upgrade to the new Analog UEGO, can i just get a replacement gauge and plug into the same wires? Id love it if the gauge was plug and play with the older UEGO.
Logged
SB
Administrator
500+ Post Club
*****
Posts: 893
« Reply #9 on: May 02, 2009, 08:02:34 AM »
The new Analog UEGO Gauge (AEM PN 30-5130) uses the same O2 sensor and O2 sensor harness (35-3400) as the old gauge but the power harness is different so it's not possible to just unplug the old 30-4100 and plug in a new 30-5130.

The new Analog UEGO Gauge cannot be purchased separately from the sensor and harnesses, it is only available as part of the complete kit.
Logged
Smaay
25+ Posts Club
*
Posts: 77
« Reply #10 on: May 04, 2009, 09:44:50 AM »
well crap!
Logged
RedBarchetta
EMS Poster Child
*
Posts: 4
« Reply #11 on: August 14, 2009, 07:01:21 AM »
Just to clarify something... Replacement part # 35-8494 ( the bezel/faceplate appearance kit) comes ONLY with a silver bezel and a white faceplate. This does not include a balck bezel and black faceplate. The black bezel and black faceplate come pre-loaded on the gauge and cannot be purchased seperatly. The best way to get a replacement for the black and black is to find someone who changed their gauge to silver/white combo and ask them for the black/black ones they are not using, or trade them something nice for them.......
Logged
And Saint Attila raised the hand grenade up on high, saying, "O Lord, bless this thy hand grenade that with it thou mayest blow thine enemies to tiny bits, in thy mercy."
Isai
EMS Poster Child
*
Posts: 1
« Reply #12 on: September 13, 2009, 07:36:11 PM »
Hey i'm new..! look  i have a boost gauge (35psi) it's new but the gauge can't read anything (boost or vac) and i don't know if the gauge it's **** or the sensor....! if the sensor is damage can i buy other (just the sensor) thanxxx...!
Logged
AEM Performance Electronics Forum
   
 Logged
Pages: [1]
Print
« previous next »
Jump to: