March 11, 2010, 12:05:08 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: AEM SERIES 2 EMS PLUG-N-PLAY FOR MKIV SUPRAS!
 
Pages: [1]
« previous next »
Print
Author Topic: Wierd UEGO Logging Issue  (Read 670 times)
THansenite
EMS Poster Child
*
Posts: 18
« on: May 07, 2008, 08:58:55 AM »
For some reason, logging my AEM UEGO to my FIC is not working.  I used to be able to log my AFR's just fine.  However, for about the past month or so, it hasn't let me.  I tested the wire to make sure it was ok and I was getting voltages across it.  I also hooked up a laptop and ran the gauges and it was showing my AFR's.  When I try to log to the FIC internal logger or log directly to my PC, I get a constant number.  It is usually around 15 or 19, but it stays constant the entire log duration.  There is no variance whatsoever in the numbers.  Everything else logs fine.  Any ideas on what is going on?
Logged
THansenite
EMS Poster Child
*
Posts: 18
« Reply #1 on: May 09, 2008, 10:50:06 AM »
Anyone have any ideas?  I need to get this working so I can get my car tuned better.
Logged
engineermike
EMS Poster Child
*
Posts: 8
« Reply #2 on: May 14, 2008, 03:28:36 PM »
I have the exact same problem, though I haven't tried it with the latest version of the firmware.  I called AEM and they said it's a firmware problem.
Logged
THansenite
EMS Poster Child
*
Posts: 18
« Reply #3 on: May 14, 2008, 07:23:39 PM »
Quote from: engineermike on May 14, 2008, 03:28:36 PM
I have the exact same problem, though I haven't tried it with the latest version of the firmware.  I called AEM and they said it's a firmware problem.

What are you running currently?  Version 2?  I may have to try updating to version 3 and see if that helps.  Thanks for the input.
Logged
THansenite
EMS Poster Child
*
Posts: 18
« Reply #4 on: July 11, 2008, 06:48:50 AM »
I have upgraded to version 3 and I still have the issue.  Any other suggestions?
Logged
16gPower
EMS Poster Child
*
Posts: 2
« Reply #5 on: November 13, 2009, 11:59:10 PM »
Old thread I know but anyone have a solution to this?  I am having the same issue.  When I start logging with evoscan it might log my wideband for a couple mins, or a couple secs, then it will freeze at whatever ratio it was at and stay there even though my guage clearly continues displaying the various ratios.
Logged
SV
Highaboosta
Administrator
100+ Post Club
*****
Posts: 122



WWW
« Reply #6 on: November 18, 2009, 07:27:07 AM »
Quote from: 16gPower on November 13, 2009, 11:59:10 PM
Old thread I know but anyone have a solution to this?  I am having the same issue.  When I start logging with evoscan it might log my wideband for a couple mins, or a couple secs, then it will freeze at whatever ratio it was at and stay there even though my guage clearly continues displaying the various ratios.
We will be addressing this issue in the near future. I don't have any specifics unfortunately.
Logged
隼
AEM Performance Electronics Forum
   
 Logged
Pages: [1]
Print
« previous next »
Jump to: