November 20, 2009, 02:41:05 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: AEM ECU Jumper/Extension Harnesses! Available NOW!!
 
Pages: [1]
« previous next »
Print
Author Topic: any ideas on what it should make?????  (Read 988 times)
smc_customs
25+ Posts Club
*
Posts: 28
« on: June 29, 2008, 03:33:47 PM »
its a procharged 306 making 20lbs, 8.5:1 comp ratio, aem ems, aem 3.5 bar map, UEGO dual channel aem, afr 185 heads, superVictor intake, 42lb injectors, 3inch mandrel exhaust, 70mm tb, ford racing cam not sure on specs, 1.6 rocker arms, a1000 pump with efi reg. with a sheet metal plenum.

what should it make for hp??????
Logged
smc_customs
25+ Posts Club
*
Posts: 28
« Reply #1 on: June 29, 2008, 03:57:41 PM »
Quote from: smc_customs on June 29, 2008, 03:33:47 PM
its a procharged 306 making 20lbs, 8.5:1 comp ratio, aem ems, aem 3.5 bar map, UEGO dual channel aem, afr 185 heads, superVictor intake, 42lb injectors, 3inch mandrel exhaust, 70mm tb, ford racing cam not sure on specs, 1.6 rocker arms, a1000 pump with efi reg. with a sheet metal plenum.
Logged
r.barn
100+ Post Club
**
Posts: 172
« Reply #2 on: June 29, 2008, 05:52:11 PM »
Enough to break the motor clean in two
Logged
'89 5.0 LX-Vert, 351W roller, RHS200's, LSM custom turbo cam,
SuperVictor EFI intake,  4 brl TB, AEM .... Twin 60mm turbos coming
smc_customs
25+ Posts Club
*
Posts: 28
« Reply #3 on: June 29, 2008, 06:52:53 PM »
that makes me feel good the builder said itl be fine as long as it doesnt detinate
Logged
r.barn
100+ Post Club
**
Posts: 172
« Reply #4 on: June 29, 2008, 07:57:38 PM »
stock 302 block is only good to 500rwhp or so ..... at least and have it last

above that and you're running a ticking time bomb.
I've seen them run 700-800rwhp and last for years, but they are also WELL known for splitting right down the middle at
those power levels too

20psi 306 with AFR185 should make 700+rwhp easy.

Tune and VERY good balance and keeping rpms under 6,500rpm will help
but no gaurantees.

http://videos.streetfire.net/video/How-the-stock-ford-block_61708.htm
« Last Edit: June 29, 2008, 08:01:45 PM by r.barn » Logged
'89 5.0 LX-Vert, 351W roller, RHS200's, LSM custom turbo cam,
SuperVictor EFI intake,  4 brl TB, AEM .... Twin 60mm turbos coming
smc_customs
25+ Posts Club
*
Posts: 28
« Reply #5 on: June 29, 2008, 08:01:42 PM »
you really think itl make numbers like that?????
« Last Edit: June 29, 2008, 08:05:31 PM by smc_customs » Logged
r.barn
100+ Post Club
**
Posts: 172
« Reply #6 on: June 29, 2008, 08:03:53 PM »
Quote from: smc_customs on June 29, 2008, 08:01:42 PM
you really think itl make numbers like that?Huh?

306 with AFR 185 make 400-450rwhp at 10psi all the time on posted dyno reports
So, yes 700 at 20psi would not surprise me.
Logged
'89 5.0 LX-Vert, 351W roller, RHS200's, LSM custom turbo cam,
SuperVictor EFI intake,  4 brl TB, AEM .... Twin 60mm turbos coming
smc_customs
25+ Posts Club
*
Posts: 28
« Reply #7 on: June 29, 2008, 08:06:45 PM »
that should be enough to get a kid like me in some trouble
Logged
r.barn
100+ Post Club
**
Posts: 172
« Reply #8 on: June 29, 2008, 08:12:08 PM »
Quote from: smc_customs on June 29, 2008, 08:06:45 PM
that should be enough to get a kid like me in some trouble

enough to kill you too.
Logged
'89 5.0 LX-Vert, 351W roller, RHS200's, LSM custom turbo cam,
SuperVictor EFI intake,  4 brl TB, AEM .... Twin 60mm turbos coming
smc_customs
25+ Posts Club
*
Posts: 28
« Reply #9 on: June 29, 2008, 08:17:01 PM »
ya but you could kill yourself in a geo if you wanted to
Logged
AEM Performance Electronics Forum
   
 Logged
Pages: [1]
Print
« previous next »
Jump to: