2g tuning help

[98GSXAWD]

I was wondering if anyone had a cal file close to my specs and could help me get me tune close to drive.... Just got my car ready to drive and need some help, anything would be greatly appriciated...

98 awd eclipse
1g engine and head
1g cam sensor
75mm ford tbody , with tps and iac
magnum intake
dnp manifold
75mm gate, 70 trim turbo
1000 cc precision injectors
3.5 exhaust turbo back
8.3-1 compression

Any start up cal would help me out

thanks Ryan

[TheBoz2]

Just start with the base map that is provided, setup all the sensors, do the adjust fuel map for new injectors.  Change it from 450cc to 1000cc.

Turn on 02 feedback, and set the values at 14.7 for anything out of boost, start tuning from there.  Remember put more fuel in to start with it is better to run rich than burn a piston or a valve.  Also look through the maps that people post up to get a good idea of how much fuel you will need.  You can use an evo map to get the fuel and timing setup.  Just copy and paste.  Set up your logger with everything you need, also make sure that knock control is turned on.  That is a good safty net.

I hope this helps.