March 11, 2010, 07:57:05 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: AEM ECU Jumper/Extension Harnesses! Available NOW!!
 
Pages: [1]
Print
Author Topic: How to Switch between maps?  (Read 1040 times)
arashmzadeh
EMS Poster Child
*
Posts: 1


« on: January 21, 2009, 02:49:37 PM »

Hey guys I am getting my car tuned tomorrow night by RoadRace. I am getting two different tunes on my Evo IX I am getting a 91 octane map tune and a 100 Octane map tune, and the tuner told me to download the software on my lap top that allows me to switch between maps. Does any here know where and how I go about doing that. For example where do I download this software. I got this AEM EMS used so it did not come with any cd's. If you guys could help that I would really appreciate it. Thank you very much.
Logged
MP Tuning
Global Moderator
2,000+ Posts, Phew!
*****
Posts: I am a geek!!


91 MS13 RB25DET , 91 FC3S TII, 92 SC400


« Reply #1 on: January 21, 2009, 05:02:28 PM »

The AEMPro software can be found here:

http://forum.aempower.com/downloads/AEMRelease070406.EXE

You can actually setup the EMS, so that through the use of a toggle switch, you can switch between "Pump Gas" fuel and timing maps to "Race Gas" fuel and timing maps, without the use of a laptop.

You can even have the same switch activate a different RPM for your rev limiter, a boost pressure change (if controlled thru the EMS) or turn the anti-lag on or off, among other things.   
Logged

MP Tuning
AEM Factory Trained Tuner (I would hope so)
Tuning - Training - Consulting - Sales - Custom Applications
trequal
EMS Poster Child
*
Posts: 14

gainer


« Reply #2 on: January 25, 2009, 11:20:55 AM »

there is no second map on Aem.Just you can use nitrous map to retard/advance timing or add/remove fuel by percentage
Logged

261hp per liter @20psi
84mm B16 Smiley from TURKEY
AEM Performance Electronics Forum
   

 Logged
Pages: [1]
Print
Jump to: