March 20, 2010, 08:37:34 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: AEM SERIES 2 EMS PLUG-N-PLAY FOR MKIV SUPRAS!
 
Pages: [1]
« previous next »
Print
Author Topic: Dodge RAM SRT-10 with AEM  (Read 1287 times)
727
EMS Poster Child
*
Posts: 3
« on: June 08, 2009, 07:32:54 PM »
Hello! What calibration i should upload to AEM for Engine working?
Tryed to upload Viper calibration - but it isn't work on it.

Help Please, and sorry for my English
Logged
John Reed
Global Moderator
100+ Post Club
*****
Posts: 296


WWW
« Reply #1 on: June 09, 2009, 04:20:53 PM »
What kit do you have? The 30-1500U will not work with the SRT10 Ram directly (even though it will plug in).
Logged
John Reed
AEM Factory Trained Tuner
On location tuning available
johnreedracing@gmail.com
727
EMS Poster Child
*
Posts: 3
« Reply #2 on: June 09, 2009, 11:06:21 PM »
Quote from: John Reed on June 09, 2009, 04:20:53 PM
What kit do you have? The 30-1500U will not work with the SRT10 Ram directly (even though it will plug in).
hmm. Yes, I have 30-1500U  cry
« Last Edit: June 10, 2009, 05:40:29 AM by 727 » Logged
BoostedV10
EMS Poster Child
*
Posts: 20
« Reply #3 on: June 26, 2009, 01:02:32 PM »
The AEM 1500 was never intended to operate on an SRT-10 but can be made to do so without too much effort. The main issue is the difference in the way the ecu is integrated into the vehicle systems on the SRT as opposed to the GTS/RT-10. The stock ecu on the SRT is used for running the dash as well as a few other critical items.  In order to use the AEM 1500 on ANY SRT-10 you will need to purchase a plug and play adapter harness from a third party (I make one as well as John Reed and a few others). You may also modify the existing wiring harness but i do not recommend doing that due to reliability issues and the inability to easy switch back to a stock configuration at a later date. Feel free to contact me if you have any questions regarding this application and I will do my best to assist you with it.

James Voorhees
Boostedv10@yahoo.com
Logged
727
EMS Poster Child
*
Posts: 3
« Reply #4 on: July 13, 2009, 11:34:40 PM »
AEM start working with SRT-10 after replace crankshaft sensor. It's very strange - but it work!

Maybe anybody have something calibration for it?

RAM SRT-10 Twinturbo with forced sprayers & fuel pump.

It'll be great for study on it rolleyes
Logged
AEM Performance Electronics Forum
   
 Logged
Pages: [1]
Print
« previous next »
Jump to: