March 20, 2010, 04:00:34 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: AEM ECU Jumper/Extension Harnesses! Available NOW!!
 
Pages: [1]
« previous next »
Print
Author Topic: KA-T BaseMap  (Read 574 times)
Bugermass
EMS Poster Child
*
Posts: 22
« on: August 24, 2009, 07:00:01 AM »
Heres a tuned map for a built KA-T with ur standard T3/T4 57trim. It had a tubular Log manifold,660SARD injectors,AEM IAT,AEM 3.5bar MAP, and we used the AEM CAS..

The motor made 315HP and 344TQ at 15PSI on a mustang dyno, the manifold was choking bad above 14PSI..



WARNING!!!  This is only to be used as a reference/startup map..
* Built KA-T 660SARD AEM35 Bar.V1.19.cal (20.47 KB - downloaded 112 times.)
« Last Edit: August 24, 2009, 07:05:26 AM by Bugermass » Logged
dwaynedman
EMS Poster Child
*
Posts: 10
« Reply #1 on: October 20, 2009, 10:10:06 AM »
What fuel pressure were you running with this setup ??
Do you have anything else done internally like cams ??
What were the AFR's looking like... Pretty safe ??

Answer if you can please

Thanks,
Dwayne
Logged
AEM Performance Electronics Forum
   
 Logged
Pages: [1]
Print
« previous next »
Jump to: