March 19, 2010, 06:28:16 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: AEM ECU Jumper/Extension Harnesses! Available NOW!!
 
Pages: [1]
« previous next »
Print
Author Topic: 350Z AEM EMS  (Read 628 times)
Fueltank-Tai
EMS Poster Child
*
Posts: 5
« on: September 03, 2009, 09:39:34 PM »
Dear  AEM:
           Do you  have plug and play ECU for  350Z  . Thank you so much.   
Logged
productioturbo
EMS Poster Child
*
Posts: 19
« Reply #1 on: September 06, 2009, 09:35:48 AM »
they do not have it right now
you can use an other aemboxes they told me they have already add success with 1050 and 1900
i just tune a vq yesterday with a 1030
vtc work good everything seem to work perfectly
there is a link with a lot of good to know information if you intend to do the ecu swap
* AEM_EMS_Setup_for_VQ35DE.doc (391 KB - downloaded 56 times.)
Logged
Fueltank-Tai
EMS Poster Child
*
Posts: 5
« Reply #2 on: September 06, 2009, 07:34:25 PM »
Thank you so much.
Logged
productioturbo
EMS Poster Child
*
Posts: 19
« Reply #3 on: September 07, 2009, 06:24:26 AM »
here is few calibration for this aplication

the two first are the one that give aem with the document i previsiously send
the third one is the one i use for my custumer 1030aem with honda idlevalve map sensor and tps
* VQswap_w_VVC_Startup_Calibration_MAP.V1.19.cal (19.91 KB - downloaded 40 times.)
* VQswap_w_VVC_Startup_Calibration_TPS.V1.19.cal (19.91 KB - downloaded 36 times.)
* 1030 vq35.V1.19.cal (19.91 KB - downloaded 44 times.)
Logged
WadZii
Global Moderator
2,000+ Posts, Phew!
*****
Posts: 2668
« Reply #4 on: September 10, 2009, 02:57:46 PM »
what injectors did you use for those base calibrations
Logged
AEM Factory Trained Tuner

Warning: Do NOT use coil output #4 on a 30-1010 box

Stock b16 calibration
http://forum.aempower.com/forum/index.php?topic=18029.msg

stock ap1 s2000 calibration notes
http://forum.aempower.com/forum/index.php/topic,2514
productioturbo
EMS Poster Child
*
Posts: 19
« Reply #5 on: October 08, 2009, 07:53:22 AM »
i was using the stock one
the batteri ofset wasn't change on the 1030 base i put there
it work good on the g35 with the factory ecu for runing the cluster
Logged
AEM Performance Electronics Forum
   
 Logged
Pages: [1]
Print
« previous next »
Jump to: