This information is for those who have depinned the wires from the connector or have some how pulled out the wires from the connector and need to know how to repin the wires to the correct location.
O2 Sensor Side Connector - Looking at the wire side view with the resistor strip on top.
- Top Row from Left to Right: Yellow | Grey | Black
- Bottom Row from Left to Right: Red | White | BLANK
Harness/Gauge Side Connector - Looking at the wire side view with the grey latch on top.
- Top Row from Left to Right: Black | Brown | Orange
- Bottom Row from Left to Right: Green | White | Red
