Battery offset wizard, pressure & voltage.

[Flateric]

I'm curious if the wizard is aware of previous change or if it will modify your calibration file ontop of a previously run wizards settings.

For example.

If I run the wizard to setup my injectors from stock to the current injectors;

550cc @ 38 PSI
870cc @ 43 PSI

And then at some later point run the wizard again with the same values;

550cc @ 38 PSI
870cc @ 43 PSI

Will this modify the modified values again? Is it "aware" of itself already having affected the currently loaded calibration file or is it "blind" to the fact it has already been setup previously?

[SB]

The Change Injector Flow/Pressure wizard will blindly trust that you are feeding it good information. If you ask it to perform the same operation twice it will perform the same operation twice.