AEMTuner v0.99 Beta Build 091030 (**UPDATED 2009-10-30**)
This is a beta version of AEMTuner. It lets you preview the latest features as well as give early feedbacks. It's still in testing stage so it might not be as stable as v0.98. The final version v0.99 will be released soon.
You can download the installer program at the following location:
AEMTuner v0.99 Beta Build 091030 (**UPDATED 2009-10-30**)
ftp://aem:a3m@216.23.176.210/cust/AEMTuner_v0.99_Beta.exeSOFTWAE REQUIREMENT:
- Microsoft .Net 2.0 SP2 or .Net 3.5 SP1( for Vista user). You can get them at the following address:
.Net 2.0 SP2:
http://www.microsoft.com/downloads/details.aspx?familyid=5B2C0358-915B-4EB5-9B1D-10E506DA9D0F&displaylang=en.Net 3.5 SP1:
http://www.microsoft.com/downloads/details.aspx?familyid=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=enHARDWARE REQUIREMENT:
- USB 2.0. (USB1.1 is not support by AEMTuner).
INSTALLATION:
1. Double click AEMTuner v0.99 Beta.exe, follow the wizard to install.
2. By default, the installer will install sample calibrations and a sample workspace. Be sure to select them if this is your first time setup.
How to Install USB Driver?
1. Connect to EMS and power on.
2. After Windows pops up "Found new hardware", choose to install driver from the following place:
[Default] C:\Program Files\AEM\AEMTuner\USB Drivers (Series 2)
FEATURES:
- Global Channel Property.
Now you can customize the display name, decimal places for every channel.
- Channel Bar Display
Same as AEMPro. You can customize max/min limit and warning limit.
- Channel Display Format
Now the channel data can be shown in different format. Ex, 0/1 is shown as "On/Off"
- Gauge Display
To add a gauge, be sure you're using the updated workspace from the installer, then go to Display Explorer, add a Dashboard Display first, then right-click in the Dashboard Display to "Enter Edit Mode" and then choose "Add Gauge".
There are three types of Gauge: Dial, vertical bar and warning label. Warning Label will only show if the actual value exceeds the warning limit and stays for a certain time. You can customize the time by double clicking the warning label and find the property "Active Threshold".
- Live trace
There are two modes for live trace: Fading and no-fading.
Fading mode: live trace will keep a certain amount of data and show in 4 different colors.
No-fading mode: live trace will keep infinite data.
You can Start, Stop, Clear, Hide and Toggle trace mode using hotkeys.
- Improvement on usb connection
Things fixed/added in Build 091030
- Output pin options are shown when comparing calibration.
FEEDBACK:
You can provide feedback to us about the software on this forum. There is a forum for reporting bugs you encounter:
http://forum.aempower.com/forum/index.php/board,86.0.htmlThere is also a forum to provide suggestions for new Functionality:
http://forum.aempower.com/forum/index.php/board,85.0.html When providing functionality suggestions please remember that this software is the tuning tool ONLY, and will not in anyway change the functions of the EMS itself.
We hope you see AEMTuner as a step forward for our EMS, and look forward to hearing your feedback!
