BETA F/IC8 Software version 1.06; TPS fuel map, 17,000 RPM maps, accel pump

[SV]

F/IC8 Software Version 1.06 BETA

Disclaimer: This update is a beta version of updated software so please understand that it may have potential bugs. We have done in-house testing, but that doesn't guarantee that all bugs have been worked out yet. A previous install of software version 1.04 is required for this to work. Once this software is not considered beta anymore, a complete installer will be provided.

On top of the updates for internal logging, calc, and playback in version 1.05, this update adds the option of a TPS-based fuel map (as opposed to a MAP-based one), increase in RPM so that the maps will go to from 12,000 to 17,000 RPM (aimed at motorcycles), and the addition of an acceleration enrichment pump emulator.

This software requires a reflash of the firmware file using the provided r131.hex as well as updating of older calibrations which is done automatically and will prompt to save with a different file name (new file cannot be used in older versions of the software, so make sure to back up your calibration files).

1. To begin, extract the provided "fic8 1.06.exe" file to the following directory: C:\Program Files\AEM\FIC\fic8 1.06.exe
2. Extract the provided shortcut to your desktop or whereever you would like to access the software (this shortcut is required to run the application).
3. Flash your F/IC with the new hex file provided in the zip file.
4. Backup any calibrations you will use.
5. Open the new software and when prompted to convert to a new file, select Yes.
6. Your F/IC is ready to use the new software.

Updated instructions are included in the zip file.