AEMTuner v2.91 Build 111207 (**UPDATED 2012-01-24**)
Following is a summary of revisions included in AEMTuner V2.91:
Software updates:
- fixed a bug when editing fuel map using duty cycle
- fixed a bug in "Change Injector Flow/Pressure" wizard
- changed on Output Function form, user can double click the pin cell to start changing the output function.
- changed on Output Function form, the grouping and channel status is enabled on Vista/Win7
Calibration updates:
- Additional base cals added
- Existing base cals updated
- Wizards updated
SOFTWARE REQUIREMENTS
- Microsoft .Net 2.0 SP2 or .Net 3.5 SP1( for Vista user). You can get them at the following address:
.Net 2.0 SP2:
http://www.microsoft.com/downloads/details.aspx?familyid=5B2C0358-915B-4EB5-9B1D-10E506DA9D0F&displaylang=en.Net 3.5 SP1:
http://www.microsoft.com/downloads/details.aspx?familyid=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=enHARDWARE REQUIREMENTS
- USB 2.0. (USB1.1 is not support by AEMTuner).
INSTALLATION
1. Download the installer from here:
ftp://aem:a3m@216.23.176.210/cust/AEMTuner_v2.91.exe2. Double click the downloaded file to install.
3. By default, the installer will install sample calibrations and a sample workspace. Be sure to select them if this is your first time setup.
- How to Install USB Driver?
There is no need to install USB drivers unless you need to connect to an old EMS unit that is using 01v11 firmware or older. See the C:\Program Files\AEM\AEMTuner\Old USB Drivers folder for more info.
FEEDBACK
You can provide feedback to us about the software on this forum. There is a forum for reporting bugs you encounter:
http://forum.aempower.com/forum/index.php/board,86.0.htmlThere is also a forum to provide suggestions for new Functionality:
http://forum.aempower.com/forum/index.php/board,85.0.html When providing functionality suggestions please remember that this software is the tuning tool ONLY, it can interface and adjust calibration values but will not change the functions of the EMS itself.
We hope you see AEMTuner as a step forward for our EMS, and look forward to hearing your feedback!
