Gm boost controler hook up help

[darcrosracing]

Gm boost controler hook up help

Ok i have a eclipse gsx with a aem ems 5 bar map sensor..

I orderd the gm boost controler solinoid and the pig tail

i under stand it goes between the wastegate and turbo but does it matter in what direction..

Also the 2 grey wires coming out were do they go? ground switch 12? what pin out:

thanks for all your help...

[nukefission]

You can use the two wires that controlled the stock BCS to control the GM unit, just cut the stock connector off and solder the gray wires in. Polarity does not matter.

As for the hoses, it does matter which direction you hook it up. Refer to the Boost Control section of the manual for a diagram that describes where the hoses go.