May 24, 2013, 08:56:57 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: AEM WIDEBAND FAILSAFE GAUGE!
 
Pages: 1 [2] 3 4 ... 11
« previous next »
Print
Author Topic: Calibration Requests: please ask for maps in THIS THREAD ONLY  (Read 25907 times)
Mansoor
Where are the base cals?
*
Posts: 3
« Reply #15 on: April 24, 2010, 06:30:46 AM »
Looking For 2g Mitsubishi Eclipse tuned maps
Stock Internals and 1 bar boost on TD05-16g Turbo...
Logged
preluding
Where are the base cals?
*
Posts: 1
« Reply #16 on: May 04, 2010, 09:32:54 AM »
OK... I really hate to have to ask for this...but I have no choice.

I got the car assembled and what I thought was ready for tunning.

Unfortunately, my tuner has NEVER dealt with a stand alone ECU and mostly does Honda tuning (re-chipping and and then tunning), the nearest credible tuner is probably 8-10 hours away and I have no interest in towing the car that far.

NOW....

If i give my setup that I am running... can someone with a similiar setup give me their file to load so that my guy can go from there, just so that he is working with something closer then what I have right now.

This is me:
95 Miata -w- 1710 EMS
1.8L -w- built bottom end
GT3076
RC750 low impendance
AEM UEGO sensor and gauge (wired in lambda 2, I think, 4J)
AEM AIT sensor
MSD 3 bar map (same as GM 3 bar sensor)
Toyota Coils (wired in batch fire for now)
Logged
K24cd7
Where are the base cals?
*
Posts: 5
« Reply #17 on: May 18, 2010, 04:00:10 AM »
Im also looking for a base map for

95 honda accord

Stock k24a4 turbo on 10psi

precision 1000cc low impedence injectors
Logged
d_korv
Where are the base cals?
*
Posts: 2
« Reply #18 on: May 21, 2010, 12:05:30 AM »
Hello all!
I'm looking for sturtup calibration for EMS2 rb26dett with aem CAS.
Logged
Alpha
Global Moderator
I put a 6050 on the Space Shuttle
*****
Posts: 1093



WWW
« Reply #19 on: May 23, 2010, 08:02:13 AM »
Quote from: d_korv on May 21, 2010, 12:05:30 AM
Hello all!
I'm looking for sturtup calibration for EMS2 rb26dett with aem CAS.

Shoot an e-mail with your setup to tuning@inductionperformance.com
Logged
Adopt a Pitbull for life

- Induction Performance
- Tampa, FL 33624
- Worldwide Dyno and Track Tuning
s2k7
Where are the base cals?
*
Posts: 2
« Reply #20 on: May 26, 2010, 07:00:24 AM »
Anyone kindly enough to share a AEM EMS calibration map for Honda S2000 using Rotrex supercharger?
9 to 10 psi boost will do.

I need one for my Lotus Super 7 powered Honda S2000 engine.

Thank you people.
Logged
supershade
Where are the base cals?
*
Posts: 1
« Reply #21 on: May 27, 2010, 02:14:48 PM »
Hi everybody,

Thank you for reading this thread. Your assistance will be very much appreciated.

My car is running poorly after modification to the followings:

1. MAF to MAP conversion
2. 3" exhaust
3. Walbro 255
4. Kelford 272 cams
5. FP Green HTA
6. ETS intercooler pipes
7. FIC 850cc injectors

Need to drive the car for 15 miles to get to a tuner.
Logged
selfdestroyer
Where are the base cals?
*
Posts: 1
« Reply #22 on: May 28, 2010, 12:56:50 AM »
7M-GTE, Evo 8 550cc, MAP mpx4250ap, Gt3582R
Logged
kernel
Where are the base cals?
*
Posts: 1
« Reply #23 on: May 31, 2010, 01:58:00 PM »
since I have installed my HKS staggered camshafts 262 intake & 272 exhaust, my 2jz doesnt start anymore

I didn't have the map tuned at all, only running on stock basemap with siemens deka 850cc, veilside intake manifold, q45 tb, GM 3 BAR map and GM IAT

It was able to idle and run around the garage with this map but since HKS camshaft are installed, he doesnt even start..

I'd like to see if someone could share me a basemap with those camshafts or something similar

thanks
Logged
JMR90
Where are the base cals?
*
Posts: 5
« Reply #24 on: June 02, 2010, 10:21:44 AM »
I have a 88 LX with 1 3/4 BBK long tube headers, cat back, cold air intake, underdrive pulleys, Powermaster 140 amp alternator, 3 bar MAP, AEM AIT on the intake, 30 lb injectors, cobra intake manifold, and 75 mm throttle body.  The car idles like crap ever since I added all those parts and sounds fine when I hold the throttle at 1500 rpm until it misfires.  I need a new base map to get started.  Can anyone help me?
Logged
dquach90
Where are the base cals?
*
Posts: 1
« Reply #25 on: June 08, 2010, 09:52:34 AM »
Just recently bought an aem ems 30 1000 from a friend. I been trying to find a gsr base map to load up but have not been able to find one.

95 Honda Civic
My current setup is:
93 octane
stock injectors
stock map sensor
ls vtec
b18b1 block
gsr crank
gsr rod
type r piston
gsr head
knock off name brand intake
ebay headers
ebay exhaust

Would anyone be able to help me obtain a gsr base map or a map that i would be able to use for my setup?
please and thank you
Logged
mancolog
Where are the base cals?
*
Posts: 9
« Reply #26 on: July 09, 2010, 07:16:19 PM »
Quote from: d_korv on May 21, 2010, 12:05:30 AM
Hello all!
I'm looking for sturtup calibration for EMS2 rb26dett with aem CAS.


did you get what you were looking for?
Logged
Steveh
Where are the base cals?
*
Posts: 2
« Reply #27 on: July 16, 2010, 12:27:23 AM »
Hello all!
If anyone could share a map suitable for this setup it would be greatly appreciated, as it would lessen my dyno time!!!

s13sr20det Redtop
walbro pump
300zx fuel filter
stock 370cc injectors
stock intake man.
stock coils
tomei expreme ex. mani.
stock t25 turbo
tomei elbow
megan 3" down to 2.5" magnaflow h/f cat/exhaust
greddy fmic, greddy bov(hot side)
man. boost tee
stock maf(sr20det)

probably too much info...yes i'm a newb!
Logged
MikesVr4
Where are the base cals?
*
Posts: 6
« Reply #28 on: July 27, 2010, 11:22:28 AM »
Hey guys new here and just got my AEM EMS.  I want to get a base calibration map so I can load it to my car.  Here is my setup in a nutshell...

Bored out block .060 over
weisco 8.5:1 CR
3sx custom forged rods
Forged Crank
TEC 15g's just rebuilt
GT-Pro FMIC
stage 2 heads
aeromotive-1000 AFR
aem wideband uego
HDI EBC
prosport boost and oil guage
dejon blow thru twintakes
aem ems
3.5 bar map sensor
and aem ait sensor
Lucas dark side racing 550cc inj

If anyone can help me out please let me know.


Mike
Logged
Steveh
Where are the base cals?
*
Posts: 2
« Reply #29 on: July 28, 2010, 08:53:39 PM »
Hello all!
If anyone could share a map suitable for this setup it would be greatly appreciated, as it would lessen my dyno time!!!

s13sr20det Redtop
walbro pump
300zx fuel filter
stock 370cc injectors
stock intake man.
stock coils
tomei expreme ex. mani.
stock t25 turbo
tomei elbow
megan 3" down to 2.5" magnaflow h/f cat/exhaust
greddy fmic, greddy bov(hot side)
man. boost tee
stock maf(sr20det)

probably too much info...yes i'm a newb!
Logged
Pages: 1 [2] 3 4 ... 11
Print
« previous next »
Jump to: