May 22, 2013, 02:24:46 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: AEM AQ-1 DATA LOGGER!
 
Pages: [1]
Print
Author Topic: Throttle dead spot  (Read 502 times)
SC300-T
Where are the base cals?
*
Posts: 2


« on: August 13, 2011, 06:43:32 PM »

I have the V2 box in GTE swapped SC300. I got the car to fire right up and idle fine. It even drives fine in the none boost rpm range (haven't really ventured into boost yet). One issue though...if the car is at idle and I press the gas, there's like a split sec dead time before it revs. Makes it really hard to pull off from a stop lightly. I have to get the rpm up then start releasing the clutch for it to smooth off. What table can I adjust to cure this issue?

Hopefully my explanation makes sense...

Logged
TitaniumThirteen
What's Boost Comp?
**
Posts: 112


« Reply #1 on: August 14, 2011, 01:26:44 PM »

Try the accel options and accel tables first. If the problem doesn't go away completely you will need to adjust the ignition table too smiley

Logged

Pages: [1]
Print
Jump to: