VG30DETT Z32 AEM 30-6620 CALIBRATION

[william33]

Hello ,

I have 300zx z32 , with exhaust , intercooler and injector 740 cc , stock MAF  . AEM CAS OK . All is fine , ignition ok , wizzard ok , but don't start , no fuel .

I think I Have a problem with calibration , impossible to found MAF 300ZX in "wizzard"  , only map or 3 maf (240sx s13 , s14 and toyota) with aemTuner .

I found this maf and calibration who intersted me with aemPro but this calibration is not compatible with aemtuner(impossible to select wizzard).And I can't work with AemPro , impossible to connect EMS .

If anyone have an idea where I can found a calibration for my car with stock maf , or a solution for work with aemPro with this EMS .

Thank you very much for your help .

[Armt350]

I dont know if this applies to 300z's but on the RB26 i had to configure the fuel pump to LS1 instead of the LS11 that the base map had. Otherwise the fuel pump would not run.